Returning A Product Damaged In Transportation; Storing - ABB Remote I/O RIO600 Installation And Commissioning Manual

Section 4
Unpacking, inspecting and storing
4.2.4
4.3
24

Returning a product damaged in transportation

If damage has occurred during transportation, appropriate actions must be taken
against the latest carrier.
Inform the nearest ABB office or representative. ABB should be notified immediately
if there are any discrepancies in relation to the delivery documents.

Storing

If the product is stored before installation, it must be done in the original transport
packaging in a dry and dust-free place. Observe the environmental requirements
stated in the technical manual.
1MRS757488 H
Installation and Commissioning Manual
RIO600