Functions Available In Sim4F; Measurement Functions; Three-Phase Current Fault Detection - ABB Remote I/O RIO600 Installation And Commissioning Manual

1MRS757488 H
6.1.7.1
6.1.7.2
6.1.7.3
RIO600
Installation and Commissioning Manual
Rated Sensor Current set as 80 A refers to 150 mV at 50 Hz and 180
mV at 60 Hz when 80 A is injected. Similarly, Rated sensor current
set as 250 A refers to 150 mV at 50 Hz and 180 mV at 60 Hz when 250
A is injected.

Functions available in SIM4F

Table 98: Functions available in SIM4F
Function

Measurement functions

Three-phase current
measurement
Residual current measurement
Current average and peak
measurement
Detection and indication functions
Three-phase non-directional
overcurrent fault detection
Non-directional earth-fault
detection
Negative-sequence overcurrent
protection
Three-phase inrush detector
Fault passage indicator
Measurement functions
Three-phase current measurement CMMXU
See Measurement functions.
Residual current measurement RESCMMXU
See Measurement functions.
Current peak measurement CMSTA
See Measurement functions.

Three-phase current fault detection

Three-phase non-directional overcurrent fault detection PHPTOC
See Three-phase non-directional overcurrent fault detection
IEC 61850
Edition 1 Edition 2
CMMXU CMMXU
RESCMMXU RESCMMXU
CMSTA CAVMMXU
CMAMMXU
RCAVMMXU
PHPTOC PHPTOC
EFPTOC EFPTOC
NSPTOC NSPTOC
INRPHAR INRPHAR
FPIPTOC FPIPTOC
Section 6
Commissioning
IEC 60617 IEC-ANSI
3I 3I
Io Io
- -
3I> 51P
I0> 51N
I2> 46
3I2f> 68
- -
PHPTOC.
149