Selecting The Communication View - ABB Remote I/O RIO600 Installation And Commissioning Manual

Section 8
Using the Web HMI
8.6
270
GUID-D39F297B-4DE4-477F-95AB-1CCC962FA4F5 V1 EN
Figure 104:

Selecting the communication view

The communication parameter settings are presented in the communication view.
• Click Communication in the menu bar.
• If the SNTP server is disabled, the SNTP server address is "-".
• If Modbus is disabled, the Modus client address is "-".
• The GOOSE publisher and subscriber multicast MAC addresses display
the GOOSE publisher and subscriber related information.
• If the publisher MAC filtering is enabled, it is shown by the GOOSE
Publisher Physical MAC parameter.
• If the publisher MAC is not configured, it is not visible under
Communication Parameters.
SIM4F configuration
1MRS757488 H
Installation and Commissioning Manual
RIO600