ABB Remote I/O RIO600 Installation And Commissioning Manual page 286

Section 9
Troubleshooting
Table 180: Behavior during IRF in DIM8L/DIM8H module
Module IRF
IRF in DIM8L/DIM8H
module
Table 181: Behavior during IRF in DOM4 module
Module IRF
IRF in DOM4 module
278
Behavior in an IRF condition
RIO600 as a whole LECM
Continues normal 1.
function with corrective
action
2.
3.
4.
5.
Behavior in an IRF condition
RIO600 as a whole LECM
Continues normal 1.
function with corrective
action
2.
3.
4.
5.
DIM8L/DIM8H
Shows IRF by Normal functionality is
steady IRF LED on compromised
LECM module
Shows IRF source
information on
WHMI under faults
page
DIM module under
fault's channel
values as reported
on GOOSE are
forced to default,
that is "0"
GOOSE: Update
quality of all
module's data
attributes as
required and
RIO600 module
health as per IEC
61850
Open DOM4 IRF
output contact, if
configured
DOM4
Shows IRF by Normal functionality is
steady IRF LED on compromised
LECM module
DOM4 Module
under fault's
channel is forced to
default i.e. "FALSE"
or "OFF" state. The
DOM4 module's
channel's physical
status will be forced
to "OFF" state
Show IRF on WHMI
under Faults page.
GOOSE: Updates
quality of all
modules' data
attributes and
RIO600 module
health as per IEC
61850
Opens DOM4 IRF
output contact, if it
is configured
1MRS757488 H
DOM4, AOM4, RTD4
1. Continues normal
operation
2. Shows error in
previous module
over LECM WHMI
(if detected)
DIM8L/DIM8H, RTD4,
AOM4
1. Continues normal
operation
2. Shows error in
previous module
over LECM WHMI
(if detected)
Installation and Commissioning Manual
RIO600