1MRS757488 H
Section 8
8.1
8.2
8.3
RIO600
Installation and Commissioning Manual
Using the Web HMI
Accessing the Web HMI
•
Type the IP address of RIO600 in the address bar of the Web browser and press
ENTER.
•
Ensure that both the computer and RIO600 are configured for the same subnet.
Navigating in the menu
•
Use the menu bar to access different views.
•
The General view shows general information about RIO600. The content
of the view varies depending on the RIO600 hardware configuration.
•
The Fault view shows RIO600-related fault and warning information.
•
The Status view shows status information.
•
The Configuration view shows information about the configuration.
•
The Communication view shows communication parameter settings.
Selecting the fault view
The fault view shows RIO600-related fault and warning information. The left column
lists the modules related to the fault or warning, and the right column shows the fault
or warning code with description.
•
Click Fault in the menu bar.
•
Alternatively click the fault or warning indicator sign (if present) on the
page header.
Section 8
Using the Web HMI
261