Using Usps Special Services; Entering Weight Manually For Envelope Printing - Pitney Bowes SendPro C Operator's Manual

Using Envelope Printing
6. Tap Tomorrow or Another Date on the right-hand side of the calendar, depending on the date
you need.
7. Tap Apply when the new date is highlighted on your calendar.
8. Turn your envelope over to the blank side, and place it on the deck to automatically feed your
envelope through the machine.
9. Check to ensure that the word "Redate" appears on the newly printed postage mark on the back of
your envelope. Your envelope is ready to mail.

Using USPS special services

1. Tap Envelope Printing on the Home screen.
2. Tap Class.
3. Tap Start Over to see a list of the available classes.
4. Tap the class you want. Sub classes display when they are available for your class.
a. For some classes, you must select the type of mail piece; for example, if you select First-Class
Retail Metered, you must select either Letter, Large Envelope, or Package.
b. Select any special services available for your class; for example: Insurance, COD, Certified, or
Registered.
5. Enter a ZIP code if required.
6. For some classes, you are prompted to either scan or manually enter the Electronic Certified
barcode from your label, and then to attach your label to your envelope or package.
7. Tap Apply.

Entering weight manually for Envelope Printing

Use this procedure when you know the weight of a mailpiece and you are not using the integrated
weighing platform.
Pitney Bowes Operator Guide August 2019 100