Enable Or Disable Usb - Canon ColorWave 3800 Operation Manual

Enable or disable USB

Enable or disable USB
Introduction
If you want to use USB as a location, you have to make settings for USB first. You can make the
settings in WebTools Express.
Illustration
Procedure
1. Open the [Configuration] - [External locations] tab.
2. Select [USB], and click on the [Edit] icon under [Actions]. A window opens.
3. Enter the [Name] recognizable for the user. This name appears on the user panel.
4. Enter the [Description] of USB as location.
5. Under [Enabled functionalities] you can choose the functionalities you want to use for USB.
• Choose [Print from and scan to], when you want to enable print from and scan to USB.
• Choose [Print from only] if you want to enable print from USB only.
• Choose [Scan to only] if you want to enable scan to USB only.
• Choose [None] if you want to disable the USB functionality.
6. Click [Ok] to save the settings for USB as an external location.
Result
When you enable USB and insert a USB key on the user panel, the external USB location can be
used via the user panel and in WebTools Express.
If you disable USB, USB cannot be used as an external location.
118 Chapter 3 - Define your workflow with WebTools Express