Cleaning and Maintenance
For optimum operation of the machine, we recommend to clean and check the machine regularly.
Cleaning the Platen Glass
If originals cannot be scanned properly, follow the cleaning procedure below. Clean with a cloth which is wrung after
being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning cloth for simple
Cleaning the Original Scanning Area
If originals which are fed from the feeder cannot be scanned properly, follow the procedure below.
Press <Adjustment/Maintenance> → <Maintenance> → <Original Scanning Area Cleaning
Follow the cleaning instructions on the touch panel display�
Shutting down the machine�
"Shutting Down the Machine," on p� 13
Clean the Platen Glass
• Clean the platen glass and the underside of the feeder.
Turning on the main power�
"Turning ON the Main Power," on p� 13