Tone Settings
You can set whether to sound audible tones. The following tones sound at the
following times:
• Entry Tone:
• Invalid Entry Tone:
• Restock Supplies Tone: When the toner cartridge needs to be replaced
• Error Tone:
• Job Done Tone:
1
Press
[Audible Tones].
2
Select [On] or [Off] for the desired tones ➞ press [OK].
Display the Remaining Paper Message
You can set to display the message indicating that the remaining paper loaded in a
paper drawer is low.
1
Press
[Display Remaining Paper Message].
2
Select [On] or [Off] ➞ press [OK].
When pressing keys on the control panel or keys on the
touch panel display
When an invalid key on the control panel or touch panel
display is pressed, or when the maximum number of
characters allowed is exceeded
When a malfunction occurs (e.g., paper jam or
operational error)
After a job completes (e.g., outputting, stapling, or faxing
is complete)
(Additional Functions) ➞ [Common Settings] ➞
(Additional Functions) ➞ [Common Settings] ➞
Specifying Common Settings
4
4-31