3
4
Naming a Size Key
1
2
3
4-50
Specifying Common Settings
Enter the irregular paper size using the numeric keys on the
touch panel display.
❑
Press [X] ➞ enter a value.
❑
Press [Y] ➞ enter a value.
❑
Press [OK].
NOTE
•
To enter values in millimeters, press [mm].
•
For instructions on entering values in inches, see "Values in Inches," on p. 2-25.
•
If you make a mistake when entering values, press [C] on the touch panel display
➞ enter the correct values.
(Additional Functions) ➞ [Common Settings] ➞
Press
[Registering Irregular Size].
Select a Size key ([S1] to [S5]) to name ➞ press [Register
Name].
NOTE
•
Size keys that already have settings stored in them are displayed with a colored
triangle ( ) in the lower right corner of the key.
•
If you select a Size key that already has settings stored in it, the settings are
displayed.
•
You can also name keys with no settings stored in them.
Enter a name ➞ press [OK].
NOTE
•
For instructions on entering characters, see "Entering Characters from the Touch
Panel Display," on p. 2-24.
•
If you press [OK] without entering any characters, the key name reverts to its
current name (default S1 to S5).