2
7
Storing a Memory Key Name
1
2
2-54
Storing/Recalling Scanning Modes (Mode Memory)
If you select a memory key already storing a scanning setting:
Select "Yes" to overwrite the stored settings.
Select "No" to cancel storing.
When storing is completed, the message <Stored in memory> appears for about two
seconds.
The color of the memory key storing the scanning settings changes, and the stored
settings are displayed.
Press "OK," and press "Done."
The display returns to the Scan screen.
Select the desired mail box number to display the Document
Selection screen, and press "Scan."
When you select a mail box set with a password, enter the password after selecting the
mail box, and press "OK."
The Scan screen is displayed.
Press "Special Features," and press "Mode Memory."