Table of Contents
Advertisement
IMPORTANT
•
You cannot use the Sort function with thin paper (64 to 79 g/m
Special Paper 2.
NOTE
•
The maximum number of sets that can be specified at one time is 20. If you enter a number greater
than 20, the number is automatically changed to 20 when you press
•
The maximum number of copies that can be delivered to each of the bins is as follows:
- A4, A4R:
50 sheets (80 to 104.7 g/m
25 sheets (157 to 209 g/m
- A3:
25 sheets (80 to 104.7 gm
15 sheets (157 to 209 g/m
•
Once the output exceeds the capacity of the bins, copying will temporarily stop and will only resume
after all the output copies are removed from the bins.
Group Function
The Group function automatically outputs copies into sets sorted by page number. All copies of
the same original page are grouped together and output into the bins in the manner shown in the
illustration below.
See Chapter 1, 'Basic Copying', in the Copying Guide for information on the procedure for
specifying the Group function.
IMPORTANT
•
You cannot use the Group function with thin paper (64 to 79 g/m
or Special Paper 2.
2
), transparencies, Special Paper 1, or
2
)
2
)
2
)
2
)
2
), transparencies, Special Paper 1,
(Start).
5-39
Stapler Sorter-F2
5
Advertisement
Table of Contents
Troubleshooting
