Unit / Board
Description
A
Cooling lamp burner top
B
Cooling lamp burner bottom
C
Cooling lamp
D
Exhaust Fan
E
Lamp unit
8.6 IR Receiver Front
8.6.1
IR Receiver Front swapping
How to swap the IR Receiver front
To access the IR Receiver front, the engine and the lens holder have to be removed.
1. Disconnect the IR Receiver board. (image 8-23)
2. Remove the 2 screws securing the board to front cover.
3. Remove the board.
Image 8-23
IR Receiver removal
8.7 Motor/Control Board
8.7.1
Motor/Control board swapping
How to remove the motor-control board
To access the motor control board, only the top cover of the projector has to be removed.
1. Remove the 2 screws (1&2) , securing the board on top and bottom. (image 8-24)
2. Slide the motor control board out the board slots (A&B) to remove (image 8-24).
3. Pull out all the plugs to allow board swapping (Order No kit: B401032K).
R5976766 RLM G5 22/04/2004
8. Module/Unit Identification
A
2
1
Partnumber
Part of kit B401042K
Part of kit B401042K
Part of kit B401042K
Part of kit B401042K
kit R9841880
35