FIP-1.48 033-782: NSS/DCS Function disagreement
Step
Possible causative parts:
PWBA FAX (PL8.1.5)
PWBA ESS AIO (PL8.1.2)
Checking the printer setting.
Set the [Modem Speed] of [Fax setting] in the [Admin Menu]
1
to the 2.4Kbps.Set the [ECM] of [Faxsetting] in the [Admin
Menu] to the Off.
Does the error still occur when faxing?
Checking the firmware version.
2
Is the firmware the latest version?
Checking after replacing the PWBA FAX
3
Replace the PWBA FAX. (Refer to REP8.4.)
Does the error still occur when faxing?
Check
2 - 86
Chapter 2 Troubleshooting
Remedy
Yes
Go to step 2.
End of work.
Upgrade the
Go to step 3.
firmware, then go
to step 3.
Replace the KIT
PWBA ESS AIO.
End of work.
(Refer to REP8.2.)
No