Fuji Xerox DocuPrint CM305 df Service Manual page 726

Sensor name
Feed Sensor
ADF Cover Sensor
1) Turn on the power and enter the FAX Scanner Diag.
2) Open the ADF Cover.
3) Put a paper into the ADF feeder.
4) Execute "Feed Sensor".
5) Check the sensor "Status ON".
6) Press "STOP" key to return one step higher menu.
7) Pull out a paper in the ADF feeder.
8) Execute "Feed Sensor".
9) Check the sensor "Status OFF".
10) Press "STOP" key to stop the test.
11) Close the ADF Cover.
1) Turn on the power and enter the FAX Scanner Diag.
2) Open the ADF cover.
3) Execute "ADF Cover Sensor".
4) Check the sensor "Status ON".
5) Press "STOP" key to return one step higher menu.
6) Close the ADF cover.
7) Execute "ADF Cover Sensor".
8) Check the sensor "Status OFF".
Operator Panel
Normal
9) Press "STOP" key to stop the test.
6 – 80
Confirmation Procedures
Operator Panel
Chapter 6 General
Normal
Mnt02053GA
Mnt02054GA