[Replacement]
1)
Attach the TRANSFER ASSY to the
printer.
2)
Attach the SHAFT ASSY PIVOT (PL6.1.6), GEAR T4 (PL6.1.5), PIVOT TRANS L (PL6.1.4)
and STOPPER PIVOT (PL6.1.3). (REP6.2)
3)
Close the TRANSFER ASSY.
When carrying out the work described next procedure, take care not to scratch
NOTE
the belt surface of the TRANSFER ASSY.
4)
Route the harness of the printer
through the hooks of the TRANS-
FER ASSY.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 184