Fuji Xerox DocuPrint CM305 df Service Manual page 394

28) Release the three tabs of the CHAS-
SIS MCU from the holes of the
printer, remove the CHASSIS MCU
together with the PWBA MCU from
the printer.
29) Disengage the connector (P/J221) of
the DRIVE ASSY SUB (PL7.1.1).
30) Remove the two screws (silver, tap,
8mm) that fix the front side of the
printer frame.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 118