13) Release the harness of the HAR-
NESS ASSY FUSING UNIT MG
AIO (PL6.1.2) and harness of the
SWITCH ASSY INLET MG AIO
(PL8.3.7) from the GUIDE HAR-
NESS LVPS (PL8.2.11).
14) Remove the seven screws (silver,
M4, 6mm) and the two screws (sil-
ver, tap, 8mm) that fix the CHAS-
SIS LVPS to the printer.
When carrying out the work
NOTE
described next procedure,
lift the CHASSIS LVPS
slightly up, because the
notch of the CHASSIS
LVPS hits the screw.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 249