Fuji Xerox DocuPrint CM305 df Service Manual page 348

14) Release the hook of the GEAR
ASSY FEED (PL3.1.19), remove the
GEAR ASSY FEED from the
SHAFT ASSY FEED (PL3.2.2).
When carrying out the work
NOTE
this procedure, pushing
down the LEVER FEED
(PL3.1.13).
15) Release the harness of the SOLE-
NOID FEED MSI (PL3.1.11) from
the hooks of the printer.
When carrying out the work described next procedure, leave the relay connector
NOTE
on the printer harness side.
16) Release the relay connector from the
rib of the printer, disengage the con-
necter (P/J231) of the SOLENOID
FEED MSI.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 72