Fuji Xerox DocuPrint CM305 df Service Manual page 755

Motor/Clutch/Solenoid Name
(Diag. Code)
Tray1 Feed SOLENOID (Auto)
Tray2 Feed SOLENOID (Auto)
NOTE: This procedure is for the technical staff.
When performing operation for five minutes or longer with the front cover
open, remove the PHD ASSY, and cover the drum to avoid exposure to light.
1) Remove the COVER SIDE L.
2) Power on the printer, and enter the Diag Mode.
3) Cheat the Safety Interlock System.
4) Execute the Tray1 Feed SOLENOID (Auto).
5) Check that the Feed Solenoid movement.
6) Press the "STOP" key to stop the test.
7) Remove the cheater.
8) Replace the COVER SIDE L.
NOTE: This procedure is for the technical staff.
1) Remove the COVER REAR OPT and COVER SIDE L OPT.
2) Power on the printer, and enter the Diag Mode.
3) Execute the Tray2 Feed SOLENOID (Auto).
4) Check that the Feed Solenoid movement.
5) Press the "STOP" key to stop the test.
6) Replace the COVER REAR OPT and COVER SIDE L OPT.
6 – 109
Check procedure
Cassette1 Feed Solenoid
Tray 2 Feed Solenoid
Chapter 6 General
Rio02018KA
MiA02026GA