Fip-1.P17 The Top Margin Is Incorrect / The Side Margin Is Incorrect - Fuji Xerox DocuPrint CM305 df Service Manual

FIP-1.P17 The top margin is incorrect / The side margin is incorrect

ESS and possible causative parts
- PHD ASSY (PL4.1.21)
- TRANSFER ASSY (PL6.1.7)
- ROS ASSY (PL4.1.1)
- IIT ASSY SUB (PL10.1.11)
- ROLL ASSY FEED (PL10.1.5)
- PAD ASSY SEPARATOR (PL10.1.6)
- ADF ASSY (PL10.1.3)
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the error mode.
1
Does the error occur only during copying?
Checking the error mode.
2
Does the error occur when feeding the original at the ADF?
Checking the original setting.
3
Is the original set to the platen glass correctly?
Checking the original setting.
4
Does the original meet the ADF spec?
Checking the ADF Guides setting.
5 Reseat the ADF Guides.
Does the error still occur when copying?
Checking the KIT ADF FEED ROLL & SEPARATOR ROLL.
6 Are there any damages or foreign substances on the KIT
ADF FEED ROLL & SEPARATOR ROLL?
Mnt05100KA
Check
Chapter 3 Image Quality Troubleshooting
Mnt05101KA
Go to step 2.
Go to step 4.
Replace the IIT
ASSY SUB.
(Refer to REP9.5.)
Go to step 5.
Go to step 6.
Remove the
foreign
substances or
Replace the KIT
ADF FEED ROLL
& SEPARATOR
ROLL. (Refer to
REP9.2.)
3 - 40
Remedy
Yes No
Go to step 7.
Go to step 3.
Reseat the
original.
Use the platen
mode or change
the paper type.
End of work.
Replace the KIT
ADF ASSY. (Refer
to REP9.1.)