Fuji Xerox DocuPrint CM305 df Service Manual page 50

Error Message
Status
Code
LCD
MFP Controller Error
987 Error 017-987
Press Ok Button
Scan Time Out
988 Error 017-988
017
Press Ok Button
MFP Controller Error
989 Error 017-989
Press Ok Button
MCU Firmware Error
Error 024-340
340
Error Code:xxxxxxxx
Restart Printer
Download Mode
360 Error 024-360
Send FW Data
PAGEC Time Error
024 362 Error 024-362
Restart Printer
MCU Comm. Error
371 Error 024-371
Restart Printer
Press Ok Button
985
to Continue
Memory Full
USB Memory full
720
Error 026-720
Press Ok Button
026
File Write Error
721 Error 026-721
Press Ok Button
Ready to Print
446 IPv6 Duplicate
Change IP Address
027
Ready to Print
452 IPv4 Duplicate
Change IP Address
SMB Login Error
521 Error 031-521
Press Ok Button
SMB Login Error
522 Error 031-522
Press Ok Button
031
SMB Error
Invalid Share Name
523
Error 031-523
Press Ok Button
SMB Login Error
Error 031-524
524
Press Ok Button
Status Contents
<File Error>
Cannot read file because it is bigger than read destination
buffer.
<PC Scan Time Out>
Timeout at start of ScanToApplicaion.
<File Size Over>
Stop writing because size of file to be written is bigger
than read destination buffer (even if file writing is
continued, it is impossible to read the file).
<IOT Firmware Error>
MCU firmware error occurs.
<MCU DownLoad Error>
Download failure of MCU firmware.
<IOT Start Image Marking Timeout>
"Start Image Making" has not been issued within the time
allowed.
<MCU-ESS Communication Fail>
Communication fail between MCU and ESS.
<Waiting for "Continue" key to be pressed after reloading
paper to the SSF>
Printer starts printing automatically after a certain period
of time even if the key is not pressed.
<USB Memory Full>
USB memory is full.
<USB Memory Write Error>
Writing to USB memory failed.
<IPv6 duplicate>
Duplicate IPv6 addresses detected upon startup.
<IPv4 duplicate>
Duplicate IPv4 addresses detected upon startup.
<In SMB scan, login-able workstation is restricted>
In SMB scan, login-able workstation is restricted.
<SMB user authentication fail or SMBScanener login fail>
In SMB scan, login access is rejected. Request is not
allowed.
<SMB Server Error>
Problem with share name in SMB scan server.
<SMB Scan User Overlimit>
Exceed the upper limit of the number of SMB scan users.
2 - 16
Chapter 2 Troubleshooting
FIP to be
referred
FIP-1.24
FIP-1.26
FIP-1.24
FIP-1.27
FIP-1.28
FIP-1.29
FIP-1.30
FIP-1.31
FIP-1.19
FIP-1.19
FIP-1.32
FIP-1.32
FIP-1.33
FIP-1.33
FIP-1.34
FIP-1.35