Fuji Xerox DocuPrint CM305 df Service Manual page 66

Error Message
Status
Code
LCD
NV RAM Error
323 Error 116-323
Restart Printer
Controller Error
324 Error 116-324
Restart Printer
NV RAM Error
326 Error 116-326
Restart Printer
Controller Error
327 Error 116-327
Restart Printer
Controller Error
328 Error 116-328
Restart Printer
ASIC Error
343 Error 116-343
Restart Printer
Network Error
350 Error 116-350
Restart Printer
Network Error
355 Error 116-355
Restart Printer
116
PCI Error
361 Error 116-361
Restart Printer
PCI Error
362 Error 116-362
Restart Printer
PCI Error
363 Error 116-363
Restart Printer
Clock Error
364 Error 116-364
Restart Printer
PCI Error
366 Error 116-366
Restart Printer
PCI Error
368 Error 116-368
Restart Printer
PCI Error
369 Error 116-369
Restart Printer
NV RAM Error
390 Error 116-390
Restart Printer
Status Contents
<ESS NVRAM 1 R/W Check Fail>
An error occurred during the master
NVRAM 1 read/write check at the time of initialization.
<ESS Illegal Exception>
The Exception error occurred.
<ESS NVRAM 2 R/W Check Fail>
An error occurred during the slave NVRAM 2 read/write
check at the time of initialization.
(Reserved)
<ESS Instruction Cache Error>
The CPU instruction cache error occurred.
<ESS Data Cache Error>
The CPU cache error occurred.
<ESS ASIC Fail>
The ASIC error occurred.
<ESS Network Communication Fail>
A communication error occurred between the On Board
Network and ESS firmware.
<On Board Network Fatal Error>
An error occurred during the onboard network check.
<PCI Bus#0 Error Detected>
Connection error occurred between the PCI BUS port and
the port of peripheral devices.
<PCI Bus#0 Host Bridge Controller Error>
Connection error occurred between the PCI BUS port and
the port of peripheral devices.
<PCI Bus#1 Host Bridge Controller Error>
Connection error occurred between the PCI BUS port and
the port of peripheral devices.
<Timer Fail>
The timer fault is detected.
<PCI Bus#1 Error Detected>
Connection error occurred between the PCI BUS port and
the port of peripheral devices.
<PCI Error Messages received from Bus#0-Device#1>
Connection error occurred between the PCI BUS port and
the port of peripheral devices.
<PCI Error Messages received from Bus#0-Device#0>
Connection error occurred between the PCI BUS port and
the port of peripheral devices.
<ESS NVRAM 1 SIZE And ID Check Fail>
Upon turning the power ON, an error occurred during
checks on consistency of the NVRAM size between the
system-required one and actual one and on consistency
of the recorded IDs.
2 - 32
Chapter 2 Troubleshooting
FIP to be
referred
FIP-1.8
FIP-1.8
FIP-1.8
FIP-1.8
FIP-1.8
FIP-1.8
FIP-1.8
FIP-1.100
FIP-1.101
FIP-1.101
FIP-1.101
FIP-1.8
FIP-1.101
FIP-1.101
FIP-1.101
FIP-1.8