Fuji Xerox DocuPrint CM305 df Service Manual page 251

Step
Checking the Toner Type
8
Is the XEROX Toner seated?
Checking after resetting the PHD ASSY.
9 Reseat the PHD ASSY.
Is the image printed correctly?
Checking after resetting the PWBA HVPS.
10 Reseat the PWBA HVPS.
Is the image printed correctly?
Checking after replacing the PHD ASSY.
11 Replace the PHD ASSY. (Refer to REP4.6.)
Is the image printed correctly?
Check
3 - 29
Chapter 3 Image Quality Troubleshooting
Remedy
Yes
Go to step 9.
End of work.
End of work.
End of work.
No
Replace the toner
with the XEROX
toner.
Go to step 10.
Go to step 11.
Replace the
PWBA HVPS.
(Refer to REP4.5.)