Fuji Xerox DocuPrint CM305 df Service Manual page 522

[Replacement]
1) Route the connector (J48) of the
SWITCH ASSY INLET MG AIO
through the hole of the CHASSIS
INLET.
2) Attach the AC INLET of the
SWITCH ASSY INLET MG AIO to
the CHASSIS INLET, and secure it
with the hooks.
3) Attach the SWITCH POWER of the
SWITCH ASSY INLET MG AIO to
the CHASSIS INLET, and secure it
with the hooks.
When replacing the
NOTE
SWITCH ASSY INLET MG
AIO, match the ON/OFF
mark of the SWITCH
POWER with the mark on
the CHASSIS INLET.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 246