Fuji Xerox DocuPrint CM305 df Service Manual page 61

Error Message
Status
Code
LCD
Jam at Tray 1
Check Tray 1.
071 100
Open/Close Front
Cover.
Jam at Tray 2
Check Tray 2
100
Open/Close Front
Cover.
Jam at Tray 2
Open Tray 2
101
Open/Close Front
Cover.
072
250 Feeder Error
215 Error 072-215
Restart Printer
Motor Error
216 Error 072-216
Restart Printer
Jam at Tray 1 or 2
900 Open Tray 1 or 2
Open Front Cover
Jam at Front Cover
101 Open Front Cover
and Remove Paper
Jam at Manual Feed
Slot
075 Remove Paper from
102
Manual Feed Slot.
Open/Close Front
Cover.
Reseat Paper in
923
the Manual Feed Slot
Jam at Front Cover
100 Open Front Cover
and Remove Paper
Jam at Front Cover
101 Open Front Cover
and Remove Paper
Jam at Exit
102 Open Front Cover
and Remove Paper
077
Jam at Exit
103 Open Front Cover
and Remove Paper
Jam at Exit
104 Open Front Cover
and Remove Paper
Jam at Exit
105 Open Front Cover
and Remove Paper
<IOT Tray1 Misfeed JAM>
The Regi Sensor is not turned ON within the specified
time after feeding a paper from Tray 1.
This code is given when the Optional 250 Sheet Feeder is installed.
<IOT Tray2 Misfeed JAM>
The Paper Path Sensor of Tray 2 is not turned ON within
the specified time after feeding a paper from Tray 2.
<IOT Feeder 2 JAM>
A jam has been detected between the Regi Sensor and
the Paper Sensor of Tray 2.
This code is given when the Optional 250-Sheet Feeder is installed.
<IOT Feeder Configuration Failure>
Option Sheet Feeder Configuration error is detected.
<Option Feeder Motor Failure>
Option Feeder Motor failure is detected.
<IOT Remain Option Feeder JAM>
The paper remains at the Paper Path Sensor of Tray 2.
<IOT SSF Insert JAM>
SSF No Paper Sensor detect when a paper is inserted
from SSF.
<IOT SSF Paper Pullout JAM>
Though it tried to feed a paper from SSF, the paper was
not loaded or it was pulled out forcibly from SSF.
<Waiting for reseat paper of SSF>
Wait for the paper on SSF to be reseated.
<IOT Regi On early JAM>
The paper remains at the paper transfer path between the
Tray 1 and the Regi Sensor.
<IOT Regi OFF Jam>
The paper does not pass through the Regi Sensor within
the specified time.
<IOT Exit On JAM>
The paper does not reach the Exit Sensor within the
specified time.
<IOT Exit On early JAM>
The paper remains at the paper transfer path between the
Exit Sensor and the Regi Sensor
<IOT Exit Off JAM>
The paper does not pass through the Exit Sensor within
the specified time.
<IOT Exit Off early JAM>
The paper passed through the Exit Sensor earlier than
the specified time.
Status Contents
2 - 27
Chapter 2 Troubleshooting
FIP to be
referred
FIP-1.64
FIP-1.65
FIP-1.66
FIP-1.67
FIP-1.68
FIP-1.69
FIP-1.70
FIP-1.70
FIP-1.70
FIP-1.71
FIP-1.72
FIP-1.73
FIP-1.73
FIP-1.74
FIP-1.74