[Replacement]
1)
Attach the BEARING REGI to the
shaft of the ROLL ASSY REGI,
secure the BEARING REGI with the
hooks.
2)
Mate the notch of the CLUTCH
ASSY DRV with the rib of the
DRIVE ASSY PH, secure the
CLUTCH ASSY DRV to the ROLL
ASSY REGI with the E-ring by
using a pliers.
3)
Route the harness of the CLUTCH
ASSY DRV through the hook of the
DRIVE ASSY PH.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 68