Fuji Xerox DocuPrint CM305 df Service Manual page 811

Signal line name
VC
VD
STS
FUSING UNIT EXIT SENSED (L)
+3.3VDC
FUSING UNIT ON
RELAY TEST LOW
RELAY TEST HIGH
Temperature data measured by Temp. Sensor for controlling
temperature (analog value)
Heat Roll surface temperature data measured by Temp. Sensor
for detecting high temperature (analog value)
Paper detect signal of the FUSING UNIT Exit by the Sensor
Photo (EXIT SENSOR)
Lighting signal of FUSING UNIT Lamp
Test signal of the LVPS (Used in production process only)
7 - 33
Chapter 7 Wiring Data
Description