Fuji Xerox DocuPrint CM305 df Service Manual page 725

Sensor name
Tray Sensor
1) Turn on the power and enter the FAX Scanner Diag.
2) Set a paper in the ADF Tray.
3) Execute "Tray Sensor".
4) Check the sensor "Status ON".
5) Press "STOP" key to return one step higher menu.
6) Remove a paper in the ADF Tray.
7) Execute "Tray Sensor".
8) Check the sensor "Status OFF".
9) Press "STOP" key to stop the test
6 – 79
Confirmation Procedures
Operator Panel
Chapter 6 General
Normal
Mnt02052GA