Fuji Xerox DocuPrint CM305 df Service Manual page 211

Step
Checking the DRIVE ASSY MAIN for installation.
Reseat the DRIVE ASSY MAIN.
21 Does the noise arise from the printer?
Checked by [Digital Output] - [Main Motor] in [IOT Diag] of
diagnosis.
Checking the Sub Motor.
Does the noise arise from the printer?
22
Checked by [Digital Output] - [Sub Motor] in [IOT Diag] of
diagnosis.
Checking the PHD ASSY for installation.
Reseat the PHD ASSY.
23 Does the noise arise from the printer?
Checked by [Digital Output] - [Sub Motor] in [IOT Diag] of
diagnosis.
Checking the FUSING UNIT for installation.
Reseat the FUSING UNIT.
24 Does the noise arise from the printer?
Checked by [Digital Output] - [Sub Motor] in [IOT Diag] of
diagnosis.
Checking the DRIVE ASSY SUB for installation.
Reseat the DRIVE ASSY SUB.
25 Does the noise arise from the printer?
Checked by [Digital Output] - [Sub Motor] in [IOT Diag] of
diagnosis.
Check
2 - 177
Chapter 2 Troubleshooting
Remedy
Yes
Try replacing the
PHD ASSY (Refer
to REP4.6.), KIT
TRANSFER
ASSY (Refer to
End of work.
REP6.3.) and KIT
DRIVE ASSY
MAIN (Refer to
REP7.2.) one after
another.
Check the
installation
Go to step 23.
situation of the
printer.
Go to step 24. End of work.
Go to step 25. End of work.
Try replacing the
PHD ASSY (Refer
to REP4.6.),
FUSING UNIT
(Refer to REP6.1.)
after replacement,
End of work.
be sure to clear
the life counter
value, and DRIVE
ASSY SUB (Refer
to REP7.1.) one
after another.
No