[Replacement]
1)
Mate the two bosses of the CHAS-
SIS INLET with the hole of the
printer, attach the CHASSIS INLET
to the printer together with the
SWITCH ASSY INLET MG AIO.
2)
Secure the CHASSIS INLET to the
printer with the two hooks.
3)
Secure the CHASSIS INLET to the
printer with the two screws (silver,
tap, 8mm), secure the grounding ter-
minal of the SWITCH ASSY INLET
MG AIO to the printer with the one
screw (silver, with washer, 6mm).
Chapter 4 Disassembly / Assembly and Adjustments
4 - 256