Table of Contents
Advertisement
- NVM Settings
Under the [NVM Setting] menu, do not use [Edit NVM] and [Initialize Slave], because these oper-
ations handle internal area.
Perform only the following menu operations.
-SaveNVM to ESS
Saves the internal data of PWBA MCU to PWBA ESS temporarily when PWBA MCU needs to be replaced
due to a trouble, etc.
-LoadNVM to ESS
Loads the internal data saved via [SaveNVM to ESS] to the new PWBA MCU.
-Initialize Slave
The slave initialization is executed.
6 – 113
Chapter 6 General
Advertisement
Chapters
Table of Contents
Troubleshooting
