Step
Checking after replacing the FUSING UNIT
Replace the FUSING UNIT. (Refer to REP6.1.)
Warning: Start the operation after the FUSING UNIT has
cooled down.
7
Does the error still occur when the power is turned OFF and
ON?
NOTE: After replacement, be sure to clear the life
counter value.
Checking after the PWBA LVPS.
Replace the PWBA LVPS. (Refer to REP8.9.)
8
Does the error still occur when the power is turned off and
on?
Check
2 - 44
Chapter 2 Troubleshooting
Remedy
Yes
Go to step 8.
End of work.
Replace the KIT
PWBA MCU
End of work.
(Refer to
REP8.10.)
No