Power Supply; Fip-P1 Ac Power Fip - Fuji Xerox DocuPrint M355df Service Manual

2.4.2 Power Supply

FIP-P1 AC Power FIP

Step
Parts considered to be the cause
PWB LVPS (PL18.1.5)
HARNESS ASSY INLET (PL18.3.1)
Check the printer
1 Is there any sound from the Motor when the Power Supply
is turned ON?
Check the Power Outlet
Connect the Power Cord to another Power Outlet.
2
Does the device operate?
Check the connection of the Power Cord
Reconnect the Power Cord.
3
Does the device operate?
Check the connection of the PWB LVPS connectors
Remove the Power Cord and wait for one minute.
4 Reinstall all of the connectors on the PWB LVPS.
Does the device operate?
Check after replacing the HARNESS ASSY INLET
5 Replace the HARNESS ASSY INLET.
Does an error occur?
Check and Action
2-91
Chapter 2 Troubleshooting
2.4 Other FIP
Yes
Go to FIP-P2
DC Power FIP
End of work.
End of work.
End of work.
Replace the
PWB LVPS
(REP18.4)
No
Go to Step 2.
Go to Step 3.
Go to Step 4.
Go to Step 5.
End of work.