10) 1Shift the BRACKET SNS to front-
ward, release the five tabs of the
BRACKET SNS from the printer.
Remove the BRACKET SNS.
11) Release the left shaft of the ACTU-
ATOR SSI (PL3.2.14) from the hook
of the CHUTE UP (PL3.2.26).
12) Remove the ACTUATOR SSI and
the SPRING ACT SSI (PL3.2.15) by
releasing the right shaft of the
ACTUATOR SSI from the hole of
the CHUTE UP.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 107