9)
Rotate the STOPPER PIVOT
(PL6.1.3), mate the tabs of the
STOPPER PIVOT with the notches
of the DRIVE ASSY MAIN
(PL7.1.2).
10) Remove the STOPPER PIVOT from
the printer.
When carrying out the work described next procedure, take care not to drop the
NOTE
GEAR T4.
11) Pull out the PIVOT TRANS L
(PL6.1.4), remove the GEAR T4
(PL6.1.5) from the printer.
Chapter 4 Disassembly / Assembly and Adjustments
4 - 177