Fuji Xerox DocuPrint CM305 df Service Manual page 65

Error Message
Status
Code
LCD
C - CRUM Error
952 Error 093-952
Restart Printer
Invalid Toner
960
Yellow
Invalid Toner
961
Magenta
Invalid Toner
962
Cyan
Insert Yellow
970
Toner Cartridge
093
Insert Magenta
971
Toner Cartridge
Insert Cyan
972
Toner Cartridge
Insert Black
973
Toner Cartridge
Ready to Print
Replace Transfer
422
Unit Soon.
094
Life Almost Over.
Replace
911
Transfer Unit
USB Host Error
210 Error 116-210
Restart Printer
RAM Error
315 Error 116-315
Restart Printer
RAM Error
116 316 Error 116-316
Restart Printer
Controller Error
317 Error 116-317
Restart Printer
RAM Error
320 Error 116-320
Restart Printer
<IOT Cyan Toner CRUM Comm Fail>
The Cyan Toner Cartridge CRUM communication failure
is detected.
<IOT (Y) CRUM ID Error>
An unsupported Toner Cartridge (Y) is detected.
<IOT (M) CRUM ID Error>
An unsupported Toner Cartridge (M) is detected.
<IOT (C) CRUM ID Error>
An unsupported Toner Cartridge (C) is detected.
<IOT Toner Cartridge (Y) Detached>
The Toner Cartridge (Y) is not installed in the printer. If no
toner cartridge has been installed in the printer, a warning
is indicated on the LCD panel in the following order:
1)Black  2)Cyan  3)Magenta  4)Yellow
<IOT Toner Cartridge (M) Detached>
The Toner Cartridge (M) is not installed in the printer. If no
toner cartridge has been installed in the printer, a warning
is indicated on the LCD panel in the following order:
1)Black  2)Cyan  3)Magenta  4)Yellow
<IOT Toner Cartridge (C) Detached>
The Toner Cartridge (C) is not installed in the printer. If no
toner cartridge has been installed in the printer, a warning
is indicated on the LCD panel in the following order:
1)Black  2)Cyan  3)Magenta  4)Yellow
<IOT Toner Cartridge (K) Detached>
The Toner Cartridge (K) is not installed in the printer. If no
toner cartridge has been installed in the printer, a warning
is indicated on the LCD panel in the following order:
1)Black  2)Cyan  3)Magenta  4)Yellow
<IOT Belt Unit Near Life>
The Belt Unit has reached the replacement time.
<IOT Belt Unit Life Over>
The Belt Unit has reached the replacement time.
<USB Host Error>
Fatal error of USB Host driver
<ESS On Board RAM R/W Check Fail>
An error occurred during the onboard
RAM read/write check at the time of initialization.
This code is given when the Optional 512MB Memory is installed.
<ESS DIMM Slot RAM R/W Check Fail>
Unsupported additional memory module is detected in the
memory slot.
<ESS ROM Check (Main) Fail>
Checksum error occurred in the main program ROM.
This code is given when the Optional 512MB Memory is installed.
<ESS DIMM Slot RAM Error>
Additional memory module is not completely inserted in
the slot.
Status Contents
2 - 31
Chapter 2 Troubleshooting
FIP to be
referred
FIP-1.93
FIP-1.94
FIP-1.94
FIP-1.94
FIP-1.96
FIP-1.96
FIP-1.96
FIP-1.96
FIP-1.97
FIP-1.98
FIP-1.8
FIP-1.8
FIP-1.99
FIP-1.8
FIP-1.99