Software Disable Network Cards In Core/Net 1 From Core/Net 0 - Avaya 1000M Upgrade

Page 64 of 212 Performing the upgrade

Software disable Network cards in Core/Net 1 from Core/Net 0

NN43021-461 Standard 06.03
CAUTION — Service Interruption
Service Interruption
At this point, the upgrade interrupts service.
Procedure 12
Software disabling cards in network slots of Core/Net 1 from Core/Net 0
1 In Core/Net 1 only, software disable all network and I/O cards such as
XNET, TTY, Conf/TDS and ISDN cards:
a. In Core/Net 1 only, disable XNET.
LD 32
DISL sl
****
b. In Core/Net 1 only, disable ENET.
LD 32
DISL X
****
c. In Core/Net 1 only, software disable each port on the SDI cards:
LD 37
DIS TTY x
****
d. In Core/Net 1 only, disable DTI cards.
LD 60
June 2014
Load program
sl = the superloop number of the XNET card
Exit program
Load program
X= the loop number of the ENET card
Exit program
Load program
x = the number of the interface device attached to
a port
Exit program
Load program