Table of Contents
Advertisement
Page 102 of 212
Configuring IP addresses
NN43021-461
Standard 06.03
Performing the upgrade
4
Print the customer data block(s) in LD 21.
LD 21
REQ
TYPE
CUST
****
Core 1 is now active, clock 1 is active, CNI is disabled in
Core 0.
Procedure 25
Configuring the IP addresses
Two unique IP address are required for the CP PIV system to communicate
with the LAN. One IP address is defined for the active Core. The second IP
address is defined for the inactive Core.
1
Use the following to check the status of the system's IP address:
LD 117
prt host
If the system returns with host names "active" and "inactive", go to
"Check for Peripheral Software Download to Core 1" on page 103. If
the system returns no host names, complete the steps below.
2
Contact your System Administrator to identify IP address and subnet
mask information.
June 2014
Load program
PRT
CDB
xx
Exit program
End of Procedure
Load program
Print the configured host information
Advertisement
Table of Contents
