Ac Requirements - Avaya 1000M Upgrade

Page 56 of 212 Performing the upgrade
Table 6
AC requirements for Meridian 1 Option 61C CP PIV system
Order
number Description
NTHU44AA Option 61C Single Group Base Package (AC)
NN43021-461 Standard 06.03
The equipment room must provide the appropriate number of 30 Ampere
outlets. One 175-264 Vac, 47-63 Hz, 30 Ampere outlet is required for every
pedestal or column.
If supporting additional Meridian 1 modules, order additional top cap &
pedestal packages (NTWB15BA). One top cap and pedestal package supports
up to 4 modules.
To cover all exposed module sides and to connect modules side-to-side,
additional NT9D18AA module side covers and NT8D49AA column spacer
kits must be ordered separately.
The NTHU44AA and DA packages contain common equipment hardware
only, including two CP PIV Pentium call processor cards and two NTRB53
Clock Controller cards.
These packages are designed for computer floor installation, with all cables
exiting from the pedestal. If the installation requires overhead cabling, order
NT7D0009 top egress panel, one per column.
An NT8D49AA Spacer kit is provided to allow for a side-by-side installation
of core/network modules. This arrangement will require an additional top cap
and pedestal package and must be ordered separately.
Intelligent peripheral equipment must be ordered separately. Order
NTWB15DA for any additional AC IPE Modules required.
Peripheral equipment (PE) or Enhanced peripheral equipment (EPE) is not
supported on systems with Pentium Processors.
June 2014
Quantity
per system
1