Disable And Remove Equipment From Core 1 - Avaya 1000M Upgrade

Page 62 of 212 Performing the upgrade

Disable and remove equipment from Core 1

NN43021-461 Standard 06.03
Procedure 9
Checking that Core 0 is active
To upgrade Core 1, verify that Core 0 is the active side performing
call processing:
1 Verify that Core 0 is active.
LD 135
STAT CPU
2 If Core 1 is active, make Core 0 active:
SCPU
****
Procedure 10
Checking that Clock Controller 0 is active
1 Check the status of the Clock Controllers:
LD 60
SSCK 0
SSCK 1
2 If Clock Controller 1 is active, switch to Clock Controller 0.
SWCK
DIS CC 1
****
3 Faceplate-disable Clock Controller 1.
June 2014
Load program
Obtain the status of the CPUs
Switch to Core 0 (if necessary)
Exit program
End of Procedure
Load program
Obtain the status of Clock Controller 0
Obtain the status of Clock Controller 1
Switch to Clock Controller 0 (if necessary)
Disable Clock Controller 1
Exit program
End of Procedure