Table of Contents
Advertisement
Page 158 of 212
Signaling Server task flow
NN43021-461
Standard 06.03
lnstalling a Signaling Server
A CP PM, CP DC or COTS server that you deploy with Signaling Server
applications is referred to as a Signaling Server. A CP PM or COTS server
that you deploy with SIP Line can be referred to as a SIP Line Gateway.
Instructions to install an IBM X306m, IBM x3350, or HP DL320-G4, or
Dell R300 COTS server are not included in this chapter. Detailed
installation instructions are in the IBM xSeries 306m User Guide, IBM
x3350 User Guide, HP ProLiant DL320 Generation 4 Server User
Guide, or the Dell PowerEdge R300 User Guide shipped with the server.
This section provides a high-level task flow for the installation or upgrade of
an Avaya Communication Server 1000 (Avaya CS 1000) system. The task
flow indicates the recommended sequence of events to follow when
configuring a system and provides the document number that contains the
detailed procedures required for the task.
For more information refer to the following documents, which are referenced
in Figure 32 on
page
•
Linux Platform Base and Applications Installation and Commissioning
(NN43001-315)
•
Element Manager: System Administration (NN43001-632)
•
Signaling Server IP Line Applications Fundamentals (NN3001-125)
June 2014
IMPORTANT!
159:
Advertisement
Table of Contents
