Table of Contents
Advertisement
Page 172 of 212
Figure 41
ELAN connection on Ethernet port coupler
NN43021-461
Standard 06.03
lnstalling a Signaling Server
9
Connect the server to the TLAN subnet.
a.
Insert one end of the remaining RJ-45 CAT5 Ethernet patch cable
(supplied) into the TLAN network interface (TLAN port) on the Server
faceplate.
b.
Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c.
Plug the other end of the Ethernet patch cable into the remaining
Ethernet port coupler mounted in the Ethernet port adapter plate.
d.
Label the Ethernet port coupler as TLAN.
See Figure 42 and Figure 43.
June 2014
Advertisement
Table of Contents
