Table of Contents
Advertisement
Page 52 of 212
Preparing and planning for the upgrade
Check requirements for CNI to 3PE cables (NTND14)
NN43021-461
Standard 06.03
configuration, the active Core (either Core 0 or Core 1) that handles call
processing is always identified by the same IP address.
Contact your System Administrator to identify two unique IP addresses
before the upgrade.
When configuring NTND14 cables, observe the following
rules:
• The shortest NTND14 Cable should always be used.
• A network group requires 4 NTND14 cables, 2 to
• A check should be made on the existing NTND14
Note: The NTND14 BX 50' cables are manufacture
discontinued.
June 2014
IMPORTANT!
each half group. Both cables to each half group must
be the same length.
cables. Replace any cables that do not meet the
above requirement.
Advertisement
Table of Contents
