Making The Rmd Bootable - Avaya 1000M Upgrade

Making the RMD bootable

Preparing and planning for the upgrade
6 Remove the 2 MByte customer database diskette from the floppy drive of
the IOP/CMDU. Do not reboot the system at this point.
CAUTION — Data Loss
The PC utility used in the following procedure
(mkbootrmd.exe) does not validate whether the drive
letter entered is a valid RMD CF card. You must enter
the correct RMD drive letter when prompted or risk
formatting the incorrect drive.
The PC utility used in the following procedure
(mkbootrmd.exe) will erase any data on the CF card. For
more information, read the
README_BOOTABLE_RMD.txt file.
Note: This utility is supported by all versions of
Microsoft Windows.
The installation RMD CF card must come preformatted and bootable from
Avaya. Consumer CF cards are not bootable by default and must be made
bootable as outlined in Procedure 6 on
Procedure 6
Making the RMD bootable
1 After downloading the software image file, unzip it to a directory on your
PC.
2 Open the utilities folder.
End of Procedure
page 43.
61C to CS 1000M SG CP PIV Upgrade
Page 43 of 212