Avaya 1000M Upgrade page 153

7 Test the clocks:
a. Verify that the clock controller is assigned to the active Core:
LD 60
SSCK x
SWCK
****
8 Verify that the Clock Controllers are switching correctly:
SWCK
SWCK
9 Check applications.
10 Check dial tone.
Performing the upgrade
Load program
Obtain status of the clock controllers (x is "0" or
"1" for Clock 0 or Clock 1)
Switch the Clock (if necessary)
Exit program
Switch Clock
Note: You must wait a minimum of one minute for
clocks to synchronize.
Switch Clock again
End of Procedure
61C to CS 1000M SG CP PIV Upgrade
Page 153 of 212