Rear Turning Indicator Removal; Front Turn Indicator Removal - Husqvarna TC 449 2011 I.E. Workshop Manual

GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Rear turning indicator removal

- Disconnect the connectors (1).
- Loosen the screws (2) and remove the turning indicators (3).
When reassembling, check that the water drainage hole (4) is placed
underneath.
H11167
H11168

Front turn indicator removal

- Disconnect the connectors (1)
- Loosen the screws (2) and remove the turning indicators (3).
When reassembling, check that the water drainage hole (4) is placed
underneath.
H11170
H11169
E.5
H11169
Workshop Manual Ed. 03-2012