Adjustment/Calibration" Menu; Calling The "Adjustment/Calibration" Menu - Sirona Orthophos XG 3D/Ceph Installation Manual

13 Adjusting and calibrating the unit
13.1 General information about unit adjustment and calibration
196
13.1.2

"Adjustment/Calibration" menu

The menu guides you through the procedure to adjust and calibrate the
unit.
13.1.2.1

Calling the "Adjustment/Calibration" menu

You can call the
Calling XG and GALILEOS, new
"Utilities" "Constancy test..."
/
exposure "
/
Password prompt (see section entitled "Password protection")
"Select X-ray device"
The
only displayed if more than one unit has been set up in SIDEXIS XG.
Password protection
"Adjustment/calibration"
The
Password XG and GALILEOS, new
Reverse the number of the month and the number of the day and use
them as the password:
March 12th = 03 12 becomes 3021, which is the password of that day.
Service mode
When you open the
Service XG and GALILEOS, new
from user mode to the PC service mode logged by the PC. In PC service
mode, the control options that are available on the control panel are
determined by SIDEXIS XG and the service routine currently selected.
General control of the unit by means of the control panel (as in the user
mode) is not possible in this mode.
Service mode is displayed on the Easypad via the PC service image.
Easypad service
Installation Manual ORTHOPHOS XG 3D / Ceph
"Adjustment/calibration"
"3D"
/ /
"Select X-ray component"
"Select X-ray component"
and
menu is password-protected.
"Adjustment/calibration"
Sirona Dental Systems GmbH
menu via SIDEXIS XG:
"Select X-ray device" "Service
/
"Adjustment/calibration"
/
prompts are
menu, the unit switches
63 03 452 D3352
D3352.031.05.08.02 10.2015
/