Service Menu; Touchscreen Settings; Closing Menu Cells - Sirona galileos comfort plus Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions GALILEOS Comfort PLUS (CANADA) GALILEOS
64 91 208 D3437
D3437.201.09.07.02 12.2015
4.4.3

Service menu

The Service menu is exclusively intended for use by service engineers.
Service engineers can access the Service menu from the Basic Settings
menu (Level 3) via the wrench icon (O) and a special input algorithm.
For further information on accessing the Service menu and individual
service routines, please refer to the Service Manual.
4.4.4

Touchscreen settings

When you touch the question mark (i) in the lower right corner of the
touchscreen, a touchscreen setting menu appears starting in the first
level.
You can open two menu lines by touching the corresponding icons in
column (C).
In the upper menu line, you can switch off the clicking tone of the
touchscreen by activating the crossed-out musical note symbol.
In the lower menu line, you can adjust the intensity of the touchscreen
display with the –/+ keys. During the adjustment a reference value will
appear above the symbol in column (C).
IMPORTANT
The unit must run for at least 10 minutes before adjusting the
touchscreen intensity to ensure that the touchscreen has reached its full
brightness. The contrast setting has been blocked until now (as denoted
by an hour glass displayed above the contrast symbol).
To close the respective menu line, touch the blue arrow at the left end of
the corresponding line or the relevant symbol in column (C).
To return to the previous level, touch the blue arrow (D) at the top of
column (C).
4.4.5

Closing menu cells

● by touching the blue arrows
● by touching the corresponding symbol in the light blue area at the
right margin.
4 Controls and functional elements
4.4 General touchscreen functions on the Easypad
31