Trial Operation; Inspection And Checking Before Trial Operation - YASKAWA E-V Series User Manual

4.4

Trial Operation

To check the movement of a linear servomotor, refer to
(SIEPS80000044).
This section describes a trial operation using MECHATROLINK-II communications.

4.4.1 Inspection and Checking before Trial Operation

To ensure safe and correct trial operation, inspect and check the following items before starting trial operation.
(1) Servomotors
Inspect and check the following items, and take appropriate measures before performing trial operation if any
problem exists.
• Are all wiring and connections correct?
• Are all nuts and bolts securely tightened?
• If the servomotor has an oil seal, is the seal undamaged and is the motor oiled?
(2) SERVOPACKs
Inspect and check the following items, and take appropriate measures before performing trial operation if any
problem exists.
• Are all wiring and connections correct?
• Is the correct power supply voltage being supplied to the SERVOPACK?
Σ
-V Series User's Manual, Setup, Linear Motor

4.4 Trial Operation

4
4-15